Carriage Total: £0
Grand Total: £0
This kit, comprising the Triggersmart Mk2 Controller, WMS-1 Multi Sensor and Battery IR Transmitter provides reliable wireless camera triggering for amateur or professional use in a compact and easily portable form. The WMS-1 Wireless Multi Sensor includes switchable light, infrared beam and sound triggering options, communicating wirelessly with the Controller unit. Triggersmart is compatible with most DSLR and mirrorless cameras currently on the market via a low cost cable. The possibilities of capturing astounding images are limited only by the user's imagination!
Easily capture images by triggering the camera using sound, light intensity increase, movement or by breaking an infra-red light beam.
Kit saves £9.90 on separate prices
Compatible with a wide variety of still or video cameras using the supplied 2.5mm jack cables (see below for list). There are inexpensive alternative connectors for other types of socket.
The Triggersmart Mk2 Controller communicates wirelessly with the WMS-1 Multi Sensor, and can also be connected to the Triggerbeam, Triggerscout, wired triggers and many other sensors.
For infra-red beam operation, the Battery IR Transmitter is aimed at the receiver in the WMS-1 unit.
Digitally set the delay and trigger time:
Delay time: 1ms to 10 seconds
Trigger (burst) time: 0.1 to 10 seconds
Burst or one shot firing mode
Auto and manual trigger reset
Wireless 433Mhz connection with 16 channels
Manual over-ride of focusing and triggering
Powered by 2 x PP3 batteries; long battery life
Dimensions: 10W x 100D x 35H mm
Activation delay : <30ms
IR beam range: 20cm to 2m, wavelength 850nm
Flash sensor range: 1 to 1500 lumens. Sensitivity 10 lumens.
Sound response: 50 to 5000Hz at 3Db
Powered by 2 x CR2032 batteries
Dimensions: 75W x 50D x 26H mm
N.B. A cable is required to connect the Controller to the camera. These are available as a separate item.
This product contains the following items..