01420 560066 / M-F 8:30-17:30One of the largest stockists of photographic and imaging accessories in Europe
01420 560066 Order/enquiries: Monday-Friday 08:30-17:30

Basket 0 ITEMS

Sub-Total: £0

Discounts: £0

Carriage Total: £0

Grand Total: £0

FREE 3-4 Day Delivery to most UK Mainland addresses for orders over £100: Next Working Day only £5.99

Dust-Aid Platinum Light Wand Kit

Dust-Aid Platinum Light Wand Kit
  • Dust-Aid Platinum Light Wand Kit
  • Dust-Aid Platinum Light Wand Kit
  • Code: JUDAPLWK
    Usually ships in 3-5 days*
    £39.95

    The Dust-Aid Platinum Light Wand works in the same way as the standard version, but with the added advantage of a built-in light which will illuminate the sensor in DSLRs with a deep mirror box, making it easier to spot the dust. The Light Wand will remove dry, loose dust particles from any DSLR sensor. It's ideal when preparing sensors for a wet clean, and has been tested on all sensor types including those cameras with internal self-cleaning mechanisms. It is also safe to use on coated and uncoated sensor filters. The silicone pad is cleaned by pressing against a cleaning strip. Six of these are included in the kit.

    More Information

    • How to use the Dust-Aid Platinum:
      Peel the backing paper off one of the cleaning strips, then press the silicone pad onto the cleaning strip. Doing this cleans the silicone pad, and once the pad has been cleared of dust, it is ready to use.
      The silicone is naturally tacky, so dust adheres to it. Gently press the pad down on your sensor and lift. Don't rub or drag the pad, just a simple press and lift. When you have used all 6 cleaning strips you can purchase a replacement pack of 12 strips to replenish your kit.

    • Do not re-use any of the cleaning strips. 1 strip = 1 clean.

    • Always dry clean a sensor before using a wet clean swab. This avoids any dust particles being drawn across the sensor filter and scratching it.

    £39.95