01420 560066 / M-F 8:30-17:30One of the largest stockists of photographic and imaging accessories in Europe
01420 560066 Order/enquiries: Monday-Friday 08:30-17:30

Basket 0 ITEMS

Sub-Total: £0

Discounts: £0

Carriage Total: £0

Grand Total: £0

FREE 3-4 Day Delivery to most UK Mainland addresses for orders over £100: Next Working Day only £6.99

PIXL-LATR Film Holder

PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • PIXL-LATR Film Holder
  • Code: PXLTR
    In stock
    £45.00

    The pixl-latr is a modular frame to aid the digitising of 35mm, 120 and 4x5" films. Using friction fit 'gates' which slot into the frame, 35mm half frame, full frame or panoramic, 120 formats from 6x4.5 to 6x12, or 5x4" sheet film can be held firmly flat in position. pixl-latr's diffused back panel allows it to be illuminated from a light panel or smartphone, or even, with the supplied legs attached, in front of light or window. So whether it's a quick copy or high quality digitisation, it's a versatile and inexpensive solution for film copying.

    More Information

    • pixl-latr is an ideal solution for the multi-format film user, and especially for 4x5" sheet films. By holding the film above the illuminated surface, it avoids newton rings being formed, which can happen if the film is placed flat on the surface (the diffuser also has a lightly textured surface to prevent this occurring).

    • 4x5" sheet film
      is placed into the rear of the open frame, held in position by 8 lugs. The diffuser goes on top to hold the film flat and the frame turned over to make the exposure.

    • 120 roll film
      Two horizontal gates are placed at the top and bottom of the frame, the diffuser attached, and then a vertical gate can be positioned to mask the specific negative format.

    • 35mm film
      This requires three horizontal gates, with the smaller vertical gate used to mask each picture. A film roll or strip can be easily advanced through the pixl-latr by holding the diffuser tab and applying pressure to the front of frame to lift it before re-positioning the film. This avoids the possibility of scratching.

    • Non-slip feet are supplied to attach to the diffuser base.

    • Designed by Hamish Gill and manufactured in the UK.

    • Includes a proper printed instruction leaflet.

    • If you own a 3D printer, as the pixl-latr frame design is open source, you can make your own add-ons. Some of these can be seen here
      https://www.thingiverse.com/tag:pixllatr
      More information from www.pixl-latr.com

    Specifications

    • Ebay_Shop_Cat_No:  43479
    £45.00