Carriage Total: £0
Grand Total: £0
The H&Y K-Series Holder is made from aviation grade aluminium, takes the innovative H&Y magnetic filter frames and features a rear drop-in slot for 95mm polarising and neutral density filters. The Kit includes a circular polariser, four adapter rings and a padded case. H&Y filter frames will accept all 100mm x 2mm thick filters and the slim design of the holder means that two graduated filters can be used with a polariser without vignetting occurring on a wide-angle lens.
The circular polariser drops into a rear slot and has an integral drive via a convenient knurled wheel on the edge to facilitate adjustment. If the polariser is not required, it can be removed and stored in the supplied case, and replaced by a light-tight blanking plate (included in the kit).
Alternative combination neutral density circular polarisers in 3, 5 and 6 stops, and 10, 12 and 16 stop 95mm drop-in neutral density filters are available for the rear slot.
Filters in H&Y magnetic frames mount instantly on the front of the holder, and can be easily slid up and down to adjust a graduation line in complete safety.
Light-excluding gaskets are incorporated in the holder design, so that no light can enter behind an attached filter to potentially degrade the image.
The kit includes four metal adapter rings in sizes 67mm, 72mm, 77mm and 82mm. Other sizes from 49mm to 62mm are optionally available.
Other makes of 2mm thick 100x150mm and 100x100mm filters can be adapted for use with the H&Y K-Series holder by purchasing the relevant filter frames.
95mm Drop-in Circular Polariser
Blanking plate for polariser slot
Padded storage case
67, 72, 77 and 82mm adapters