Carriage Total: £0
Grand Total: £0
The RF60X is a powerful GN56, multi-function flashgun with a built-in Cactus V6 II transceiver, designed for use in multiple flash setups. Improvements on the RF60 include faster recycling, cooling mode to prevent overheat shut-down, and USB upgradeable firmware.
The RF60 can be set to act as a Master or Slave, so as the former can control independent power adjustment of up to 4 groups of other RF60s (or Canon, Nikon and Pentax guns mounted on a V6 transceiver). There is no limit to the number of guns in each group. 16 channels can used to avoid interference, and maximum range is 100m.
The power levels of the RF60 set in Slave mode can be remotely adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm.
To simplify use in complex lighting setups, the user no longer has to remember which flashes are in groups A, B, C and D. Instead they can be renamed from a choice of KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT.
A built-in optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.
A Multi Flash feature, available in each mode, emits a rapid series of flashes to capture multiple images of a moving subject in a single frame.
HSS Sympathy supports flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, an RF60 fires flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.
Power adjustment: 22 levels from full power to 1/128th
Compatible with all versions of the Cactus V6 transceiver.