Sub-Total: £0
Discounts: £0
Carriage Total: £0
Grand Total: £0
A very economical and ecologically-friendly one-shot film developer supplied in two parts. Part A is the developer and Part B the activator. As only small quantities of both are required, two pipettes are included to ensure precise measurement, and these can be left attached to the bottle. The developer works best with films up to ISO200, giving fine grain negatives with good sharpness. Above this film speed grain will be more accentuated.
Recommended combination per film is 2 x Part A; 1 x Part B + 50ml demineralised water (tap water can be used but will diminish quality slightly).
Guaranteed minimum shelf life of Solution A is two years; Solution B will last practically forever.
The working solution will stay good for a couple of days, but for best results we recommend mixing only as much working solution as is needed for immediate use.
For precise measuring of small amounts, pipettes are included. The pipette adapter is pressed into the bottle neck. With the pipette attached, the bottle is then turned and the required amount of chemical is pulled into the pipette. To avoid mixing up the pipettes and contaminating the developer concentrates, the pipettes can be left on the bottles. The adapter allows the bottle to seal tightly even with the pipette in place.