Carriage Total: £0
Grand Total: £0
The Case Relay Camera Power System CRUPS110 provides constant, uninterruptable power for a camera and is perfect for time-lapse photography, photo booths, video production and power-hungry LiveView shooting, or any long job. Connect Case Relay EPS to a Tether Tools Rock Solid External Battery Pack (10,000 mAh) and greatly extend shooting times compared to a standard camera battery. A 10,000 mAh external battery will give 3-10 times the power of most camera batteries, depending on the camera. You can hot swap to another power bank and continue shooting and never lose power to your camera. Specific camera connectors are required, and sold separately.
More cost effective than purchasing multiple proprietary camera batteries.
Power your camera using the same 5V power supply used for charging phones.
No need to change camera batteries: never run out of power.
Compatible with most Canon, Nikon, Sony, Panasonic, Fuji, and Olympus cameras. Check to confirm your camera model is supported.
A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
Battery: Lithium 1200 mAh 7.4V UPS battery
Input: DC 5V 2A (Type A USB)
Output: DC 7V to 9V depending on the camera's need. Up to 2A
Relay cable is 101.6cm - Relay cable with Coupler cable is 127cm
Barrel connector is 5.5mm outside diameter, 2.1mm internal diameter.
Weight: 114 grams